Analyzing T20 matches with yorkpy templates

1. Introduction

In this post I create yorkpy templates for end-to-end analysis of any T20 matches that are available on Cricsheet as yaml format. These templates can be used to analyze Intl. T20, IPL, BBL and Natwest T20. In fact they can be used for any T20 games which have been saved in the yaml format as specified by Cricsheet Cricheet.

Noteyorkpy is the clone of my R package yorkr see yorkr pads up for the Twenty20s: Part 1- Analyzing team”s match performance

With these templates you can convert all T20 match data which is in yaml format to Pandas dataframes and save them as CSV. Note The data for Intl T20, IPL, BBL and Natwest T20 have already been converted and are available at allYorkpyData. This templates is also available at Github at yorkpyTemplate. The template includes the following steps

  1. Template for conversion and setup
  2. Analysis of Any T20 match
  3. Analysis of a T20 team in all matches against another T20 team
  4. Analysis of a T20 team in all matches against all other teams
  5. Analysis of T20 batsmen and bowlers

You can recreate the files as more matches are added to Cricsheet site in IPL 2017 and future seasons. This post contains all the steps needed for detailed analysis of IPL matches, teams and IPL player. This will also be my reference in future if I decide to analyze IPL in future!

Install yorkpy with pip install yorkpy

Data conversion of the yaml files have to be done before any analysis of T20 batsmen, bowlers, any T20 match matches between any 2 T20 team or analysis of a teams performance against all other team can be done

The first step is To convert the YAML files that are available for the different T20 leagues namely Intl. T20, IPL, BBL, Natwest T20 which are available in yaml format in Cricsheet. For initial data setup we need to use slighly different functions for each of the T20 leagues since the teams are different. The function to convert yaml to Pandas dataframe and save as CSV is common for all leagues

A. For International T20

import yorkpy.analytics as yka
# COnvert yaml to pandas and save as CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\data1")

# Save all matches between any 2 Intl T20 countries
#yka.saveAllMatchesBetween2IntlT20s(dir1)

#Save all matches between an Intl.T20 country and all other countries
#yka.saveAllMatchesAllOppositionIntlT20(dir1)

# Get batting details for a country
#yka.getTeamBattingDetails(<country>,dir=dir1, save=True)

#Get bowling details
#yka.getTeamBowlingDetails(<country>,dir=dir1, save=True)

B. For Indian Premier League (IPL)

import yorkpy.analytics as yka
# COnvert yaml to pandas and save as CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\data1")

# Save all matches between any 2 IPL teams
#yka.saveAllMatchesBetween2IPLTeams(dir1)

#Save all matches between an IPL team and all other teams
#yka.saveAllMatchesAllOppositionIPLT20(dir1)

# Get batting details for an IPL team
#yka.getTeamBattingDetails(<team1>,dir=dir1, save=True)

#Get bowling details for an IPL team
#yka.getTeamBowlingDetails(<team1>>,dir=dir1, save=True)

C. For Big Bash League (BBL)

import yorkpy.analytics as yka
# COnvert yaml to pandas and save as CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\data1")

# Save all matches between any 2 BBL teams
#yka.saveAllMatchesBetween2BBLTeams(dir1)

#Save all matches between an BBL team and all other teams
#yka.saveAllMatchesAllOppositionBBLT20(dir1)

# Get batting details for an BBL team
#yka.getTeamBattingDetails(<team1>,dir=dir1, save=True)

#Get bowling details for an BBL team
#yka.getTeamBowlingDetails(<team1>>,dir=dir1, save=True)

D For Natwest T20

import yorkpy.analytics as yka
# COnvert yaml to pandas and save as CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\data1")

# Save all matches between any 2 NWB teams
#yka.saveAllMatchesBetween2NWBTeams(dir1)

#Save all matches between an NWB team and all other teams
#yka.saveAllMatchesAllOppositionNWBT20(dir1)

# Get batting details for an NWB team
#yka.getTeamBattingDetails(<team1>,dir=dir1, save=True)

#Get bowling details for an NWB team
#yka.getTeamBowlingDetails(<team1>>,dir=dir1, save=True)

Once the conversion has been done and the data has been setup we can use any of the yorkpy functions for the the 4 leagues (Intl. T20, IPL, BBL or Natwest T20) There are four classes of functions. These functions can be used for any of the

  1. Class 1 – Functions that analyze a single T20 match
  2. Class 2 – Functions that analyze the performance of a T20 team in all matches against another T20 team
  3. Class 3 – Functions that analyze the performance of a T20 team against all other teams
  4. Class 4 – Functions that analyze individual T20 batsmen or bowler

2. Class 1 functions

These functions analyze a single T20 match (Intl T20, BBL, IPL or Natwest T20) To see actual usage of Class 1 function see Pitching yorkpy … short of good length to IPL – Part 1

import yorkpy.analytics as yka
# Get scorecard
#scorecard,extras=yka.teamBattingScorecardMatch(<team1>,"Name of Team")

#Get partnership
#match=pd.read_csv("<match.csv>")
#yka.teamBatsmenPartnershipMatch(match,<team1>,<team2>,plot=True/False)

#Batsmen vs bowler
#match=pd.read_csv("<match.csv>")
#yka.teamBatsmenVsBowlersMatch(match,<team1>,<team2>,plot=True/False)

#Bowling scorecard
#match=pd.read_csv("<match.csv>")
#a=yka.teamBowlingScorecardMatch(match,<team1>)

#Wicket Kind
#match=pd.read_csv("<match.csv>")
#yka.teamBowlingWicketKindMatch((match,<team1>,<team2>)

#Wicket Match
#match=pd.read_csv("<match.csv>")
#yka.teamBowlingWicketMatch(match,<team1>,<team2>,plot=True/False)

#Bowler vs Batsman
#match=pd.read_csv("<match.csv>")
#yka.teamBowlersVsBatsmenMatch(match,<team1>,<team2>)

#Match worm chart
#match=pd.read_csv("<match.csv>")
#yka.matchWormChart(match,<team1>,<team2>,)

3. Class 2 functions

These set of functions analyze the performance a T20 team for e.g. Intl T20, BBL or Natwest T20 in all matches against another T20 team (country or IPL, BBL or Natwest T20 team. To see usages of Class 2 functions see Pitching yorkpy…on the middle and outside off-stump to IPL – Part 2

import yorkpy.analytics as yka

# Batting partnerships - Table
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#m=yka.teamBatsmenPartnershiOppnAllMatches(team1_team2_matches,<team1/team2>,report="summary/detailed", top=<n>)

# Batting partnerships - Plot
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.teamBatsmenPartnershipOppnAllMatchesChart(team1_team2_matches,<team1>,<team2> plot=<True/False>, top=<N>, partnershipRuns=<M>)

#Batsmen vs Bowlers
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.teamBatsmenVsBowlersOppnAllMatches(team1_team2_matches,<team1>,<team2> plot=<True/False>, top=<N>,runsScored=<M>)

# Batting scorecard
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#scorecard=yka.teamBattingScorecardOppnAllMatches(team1_team2_matches,<team1>,<team2>)

#Bowling scorecard
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#scorecard=yka.teamBowlingScorecardOppnAllMatches(team1_team2_matches,<team1>,<team2>)

#Bowling wicket kind
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.teamBowlingWicketKindOppositionAllMatches(team1_team2_matches,<team1>,<team2>,plot=<True/False>,top=<N>,wickets=<M>)

#Bowler vs batsman
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.teamBowlersVsBatsmenOppnAllMatches(team1_team2_matches,<team1>,<team2>,plot=<True/False>,top=<N>,runsConceded=<M>)

# Wins vs losses
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.plotWinLossBetweenTeams(team1_team2_matches,<team1>,<team2>)

#Wins by win type
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.plotWinsByRunOrWickets(team1_team2_matches,<team1>)

#Wins by toss decision
#team1_team2_matches = pd.read_csv(<matches_between_2_teams.csv)
#yka.plotWinsbyTossDecision(team1_team2_matches,<team1>,tossDecision=<field/bat>)

4. Class 3 functions

This set of functions deals with analyzing the performance of a T20 team (Intl. T20, IPL, BBL or Natwest T20) in all matches against all other teams. To see usages of Class 3 functions see Pitching yorkpy…swinging away from the leg stump to IPL – Part 3. After the data is save all matches between all oppositions we can use this data

import yorkpy.analytics as yka
#Batsman partnerships
#allmatches = pd.read_csv("<allmatchesForteam")
#m=yka.teamBatsmenPartnershiAllOppnAllMatches(allmatches,<team1>,report=<"summary"/"detailed", top=<N>,partnershipRuns=<M>)

#Batsmen vs Bowlers
#allmatches = pd.read_csv("<allmatchesForteam")
#yka.teamBatsmenVsBowlersAllOppnAllMatches(allmatches,<team1>,plot=<True/False>,top=N>,runsScored=<M>)

#Batting scorecard
#allmatches = pd.read_csv("<allmatchesForteam")
#scorecard=yka.teamBattingScorecardAllOppnAllMatches(allmatches,<team1>)

#Bowling scorecard
#allmatches = pd.read_csv("<allmatchesForteam")
#scorecard=yka.teamBowlingScorecardAllOppnAllMatches(allmatches,<team1>)

#Bowling wicket kind
#allmatches = pd.read_csv("<allmatchesForteam")
#yka.teamBowlingWicketKindAllOppnAllMatches(allmatches,<team1>,plot=<True/False>,top=<N>,wickets=<M>)

# Bowler vs Batsmen
#allmatches = pd.read_csv("<allmatchesForteam")
#yka.teamBowlersVsBatsmenAllOppnAllMatches(allmatches,<team1>,plot=<True/False>,top=<N>,runsConceded=<M>)

# Wins vs losses
#allmatches = pd.read_csv("<allmatchesForteam")
#yka.plotWinLossByTeamAllOpposition(allmatches,<team1>,plot=<"summary"/"detailed">)

# Wins by win type
#allmatches = pd.read_csv("<allmatchesForteam")
#yka.plotWinsByRunOrWicketsAllOpposition(allmatches,<team1>)

# Wins by toss decision
#allmatches = pd.read_csv("<allmatchesForteam")
#yka.plotWinsbyTossDecisionAllOpposition(allmatches,<team1>,tossDecision='bat'/'field',plot='summary'/'detailed')

5. Class 4 functions

This set of functions are used for analyzing individual batsman/bowler. From the converted xxx-BattingDetails.csv and xxx-BowlingDetails.csv we can get the batsman and bowler details as shown below. Subsequenly we can perform analyses of the individual batsman and bowler. To see actual usages of Class 4 functions see Pitching yorkpy … in the block hole – Part 4

import yorkpy.analytics as yka

#Batsman analyses
#Get batsman Dataframe
#batsmanDF=yka.getBatsmanDetails(<team1>,<batsman>,dir=dir1)

#Batsman Runs vs Deliveries
#yka.batsmanRunsVsDeliveries(batsmanDF,<batsmanName>)

#Batsman fours and sixes
#yka.batsmanFoursSixes(batsmanDF,<batsmanName>)


#Batsman dismissals
#yka.batsmanDismissals(batsmanDF,<batsmanName>)

#Batsman Runs vs Strike Rate
#yka.batsmanRunsVsStrikeRate(batsmanDF,<batsmanName>)

#Batsman Moving average
#yka.batsmanMovingAverage(batsmanDF,<batsmanName>)


#Batsman Cumulative average
#yka.batsmanCumulativeAverageRuns(batsmanDF,<batsmanName>)

#Batsman Cumulative Strike rate
#yka.batsmanCumulativeStrikeRate(batsmanDF,<batsmanName>)

#Batsman Runs against opposition
#yka.batsmanRunsAgainstOpposition(batsmanDF,<batsmanName>)

#Batsman Runs against opposition
#yka.batsmanRunsVenue(batsmanDF,<batsmanName>)


#Bowler analyses
#Get bowler dataframe
#bowlerDF=yka.getBowlerWicketDetails(<team1>,<bowler>dir=dir1)

#Mean economy rate
#yka.bowlerMeanEconomyRate(bowlerDF,<bowlerName>)


#Mean Economy rate
#yka.bowlerMeanEconomyRate(bowlerDF,<bowlerName>)

#Mean Runs conceded
#yka.bowlerMeanRunsConceded(bowlerDF,<bowlerName>)

#Moving average of wickets
#yka.bowlerMovingAverage((bowlerDF,<bowlerName>)

# Cumulative average of wickets
#yka.bowlerCumulativeAvgWickets(bowlerDF,<bowlerName>)

# Cumulative economy rate
#yka.bowlerCumulativeAvgEconRate(bowlerDF,<bowlerName>)

# Wicket plot
#yka.bowlerWicketPlot(df,name)

# Wicket against opposition
#yka.bowlerWicketsAgainstOpposition(bowlerDF,<bowlerName>)

# Wickets at venue
#yka.bowlerWicketsVenue(bowlerDF,<bowlerName>)

Important note: Do check out my other posts using yorkpy at yorkpy-posts

Conclusion

With the above templates detailed analyis can be done on

  • A T20 match
  • Performance of a team in all matches against another team
  • Performance of a team in all matches against all other teams
  • Individual batting and bowling performances

See also

  1. Deep Learning from first principles in Python, R and Octave – Part 5
  2. My travels through the realms of Data Science, Machine Learning, Deep Learning and (AI)
  3. Practical Machine Learning with R and Python – Part 4
  4. Take 4+: Presentations on ‘Elements of Neural Networks and Deep Learning’ – Parts 1-8
  5. A method to crowd source pothole marking on (Indian) roads

To see all posts click Index of posts

yorkpy takes a hat-trick, bowls out Intl. T20s, BBL and Natwest T20!!!

“Dear, dear! How queer everything is to-day! And yesterday things went on just as usual. I wonder if I’ve been changed in the night? Let me think: was I the same when I got up this morning? I almost think I can remember feeling a little different. But if I’m not the same, the next question is ’Who in the world am I? Ah, that’s the great puzzle!”

             Alice's adventures  in Wonderland, Lewis Carroll

1. Introduction

In this post, yorkpy clean bowls the following T20 formats namely International T20s, Big Bash League and Natwest T20 Blast. I take yorkpy on a spin through these T20 leagues. In the post below,I choose a random set of about 10-12 of the overall 63 functions that yorkpy has, and execute them for each of the different T20 leagues – Intl T20s, BBL and Natwest T20s. yorkpy, is the python avatar of my R package yorkr, see Introducing cricket package yorkr: Part 1- Beaten by sheer pace!

There were a couple of new functions that needed to be added for each of the T20 leagues – Intl T20, BBL and Natwest T20 to take into account the different teams in each of these leagues. Further some bugs were also ironed out in tje latest version of yorkpy. yorkpy uses data from Cricsheet . The match data is in the form of YAML files. yorkpy converts these YAML files to dataframes. YAML files are very detailed and include a ball-by-ball account of the match.

– You can clone/fork the latest code for yorkpy from github yorkpy
– This post has also been published in RPubs at yorkpy takes a hat-trick
– You can download the PDF version of this post at yorkpy takes a hat-trick

The data for IPL, Intl. T20, BBL and Natwest T20 have already been converted into pandas dataframes and saved as CSVs. You can download the converted files from Github at [allYorkpyT20Data])(https://github.com/tvganesh/allYorkpyT20Data)

yorkpy has the following 4 main classes of functions

A.Functions analyzing individual T20 match (Class 1)

This was demonstrated in Pitching yorkpy . short of good length to IPL – Part 1 The functions deal with individual T20 matches. The functions are

  1. convertYaml2PandasDataframeT20()
  2. convertAllYaml2PandasDataframesT20()
  3. teamBattingScorecardMatch()
  4. teamBatsmenPartnershipMatch()
  5. teamBatsmenVsBowlersMatch()
  6. teamBowlingScorecardMatch()
  7. teamBowlingWicketKindMatch()
  8. teamBowlingWicketRunsMatch()
  9. teamBowlingWicketMatch()
  10. teamBowlersVsBatsmenMatch()
  11. matchWormChart()

B. Functions that analyze all matches between 2 T20 teams (Class 2

Pitching yorkpy.on the middle and outside off-stump to IPL – Part 2 included functions that analyze head-to-head confrontation between any 2 T20 teams The functions are

  1. getAllMatchesBetweenTeams()
  2. saveAllMatchesBetween2IPLTeams()
  3. getAllMatchesBetweenTeams()
  4. saveAllMatchesBetween2IPLTeams()
  5. teamBatsmenPartnershiOppnAllMatches()
  6. teamBatsmenPartnershipOppnAllMatchesChart()
  7. teamBatsmenVsBowlersOppnAllMatches()
  8. teamBattingScorecardOppnAllMatches()
  9. teamBowlingScorecardOppnAllMatches()
  10. teamBowlingWicketKindOppositionAllMatches()
  11. teamBowlersVsBatsmenOppnAllMatches()
  12. plotWinLossBetweenTeams()
  13. plotWinsByRunOrWickets() 23.plotWinsbyTossDecision()

C. Functions that analyze the performance of a T20 team against all other teams (Class 3)

The post Pitching yorkpy.swinging away from the leg stump to IPL – Part 3 is based on Class C set of functions shown below

  1. getAllMatchesAllOpposition()
  2. saveAllMatchesAllOppositionIPLT20(dir1)
  3. getAllMatchesAllOpposition()
  4. saveAllMatchesAllOppositionIPLT20()
  5. teamBatsmenPartnershiAllOppnAllMatches()
  6. teamBatsmenPartnershipAllOppnAllMatchesChart()
  7. teamBatsmenVsBowlersAllOppnAllMatches()
  8. teamBattingScorecardAllOppnAllMatches()
  9. teamBowlingScorecardAllOppnAllMatches()
  10. teamBowlingWicketKindAllOppnAllMatches()
  11. teamBowlersVsBatsmenAllOppnAllMatches()
  12. plotWinLossByTeamAllOpposition()
  13. plotWinsByRunOrWicketsAllOpposition()
  14. plotWinsbyTossDecisionAllOpposition()

D. Functions that analyze performances of T20 batsmen and bowlers (Class 4)

These set of functions analyze individual batsmen and bowlers and have been used in Pitching yorkpy . in the block hole – Part 4 The functions are

  1. getTeamBattingDetails()
  2. getBatsmanDetails()
  3. batsmanRunsVsDeliveries()
  4. batsmanFoursSixes()
  5. batsmanDismissals()
  6. batsmanRunsVsStrikeRate()
  7. batsmanMovingAverage()
  8. batsmanCumulativeAverageRuns()
  9. batsmanCumulativeStrikeRate()
  10. batsmanRunsAgainstOpposition()
  11. batsmanRunsVenue
  12. getTeamBowlingDetails()
  13. getBowlerWicketDetails()
  14. bowlerMeanEconomyRate()
  15. bowlerMeanRunsConceded()
  16. bowlerMovingAverage()
  17. bowlerCumulativeAvgWickets()
  18. bowlerCumulativeAvgEconRate()
  19. bowlerWicketPlot()
  20. bowlerWicketsAgainstOpposition()
  21. bowlerWicketsVenue()

Additional new functions were added to handle Intl T20s, Big Bash League and Natwest T20 Blast, since the teams are different. They are

59. saveAllMatchesBetween2IntlT20s()
60. saveAllMatchesAllOppositionIntlT20()
61. saveAllMatchesBetween2BBLTeams()
62 saveAllMatchesAllOppositionBBLT20()
63. saveAllMatchesBetween2NWBTeams()
64. saveAllMatchesAllOppositionNWBT20()

All other functions can be used as is! You can get the help of any function in yorkpy using

import yorkpy.analytics as yka
help(yka.teamBatsmenPartnershiOppnAllMatches)
## Help on function teamBatsmenPartnershiOppnAllMatches in module yorkpy.analytics:
## 
## teamBatsmenPartnershiOppnAllMatches(matches, theTeam, report='summary', top=5)
##     Team batting partnership against a opposition all IPL matches
##     
##     Description
##     
##     This function computes the performance of batsmen against all bowlers of an oppositions in 
##     all matches. This function returns a dataframe
##     
##     Usage
##     
##     teamBatsmenPartnershiOppnAllMatches(matches,theTeam,report="summary")
##     Arguments
##     
##     matches     
##     All the matches of the team against the oppositions
##     theTeam     
##     The team for which the the batting partnerships are sought
##     report      
##     If the report="summary" then the list of top batsmen with the highest partnerships 
##     is displayed. If report="detailed" then the detailed break up of partnership is returned 
##     as a dataframe
##     top
##     The number of players to be displayed from the top
##     Value
##     
##     partnerships The data frame of the partnerships
##     
##     Note
##     
##     Maintainer: Tinniam V Ganesh tvganesh.85@gmail.com
##     
##     Author(s)
##     
##     Tinniam V Ganesh
##     
##     References
##     
##     http://cricsheet.org/
##     https://gigadom.wordpress.com/
##     
##     
##     See Also
##     
##     teamBatsmenVsBowlersOppnAllMatchesPlot
##     teamBatsmenPartnershipOppnAllMatchesChart

As I mentioned above I will be randomly choosing a set of 12 functions from Class 1,2,3,4 for each of the T20 leagues (Intl T20, BBL and NWB T20) for analysis

2. International T20s

The following functions were added for handling Intl. T20s

  1. saveAllMatchesBetween2IntlT20s()
  2. saveAllMatchesAllOppositionIntlT20()

To handle the countries in Intl. T20s below

Afghanistan, Australia, Bangladesh, Bermuda, Canada, England,Hong Kong,India, Ireland, Kenya, Nepal, Netherlands, “New Zealand, Oman,Pakistan,Scotland,South Africa, Sri Lanka, United Arab Emirates,West Indies, Zimbabwe

import os
#os.chdir('C:\\software\\cricket-package\\yorkpyT20\\t20s')
#import yorkpy.analytics as yka
#1.  Convert all YAML files to dataframes and CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\data1")
#dir1='C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches'
#2. Save all matches between 2 T20 teams
#yka.saveAllMatchesBetween2IntlT20s(dir1)
#3. Save all matches between a T20 team and all other teams
#dir1='C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches'
#yka.saveAllMatchesAllOppositionIntlT20(dir1)
#4. Get batting details
#dir1='C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches
#yka.getTeamBattingDetails("Afghanistan",dir=dir1, save=True)
#yka.getTeamBattingDetails("Australia",dir=dir1,save=True)
#yka.getTeamBattingDetails("Bangladesh",dir=dir1,save=True)
#...
#5. Get bowling details
#dir1='C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches
#yka.getTeamBowlingDetails("Afghanistan",dir=dir1, save=True)
#yka.getTeamBowlingDetails("Australia",dir=dir1,save=True)
#yka.getTeamBowlingDetails("Bangladesh",dir=dir1,save=True)
# ...

Once the data is converted you can use the yorkpy functions. The data has been converted for Intl T20 and is available at Github at IntlT20

To use the yorkpy functions for a new league we need to initial convert the YAML files into appropriate format for processing by yorkpy functions

This will create the necessary files which are are used in the functions below

2.2 2.1 Intl. T20 – Team score card  (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches"
path=os.path.join(dir1,".\\India-New Zealand-2007-09-16.csv")
ind_nz=pd.read_csv(path)
scorecard,extras=yka.teamBattingScorecardMatch(ind_nz,"India")
print(scorecard)
##             batsman  runs  balls  4s  6s          SR
## 0         G Gambhir    51     34   5   2  150.000000
## 1          V Sehwag    40     18   6   2  222.222222
## 2        RV Uthappa     0      2   0   0    0.000000
## 3          MS Dhoni    24     20   2   0  120.000000
## 4      Yuvraj Singh     5      7   0   0   71.428571
## 5        KD Karthik    17     12   3   0  141.666667
## 6         IK Pathan    11     10   2   0  110.000000
## 7        AB Agarkar     1      2   0   0   50.000000
## 8   Harbhajan Singh     7      6   1   0  116.666667
## 9       S Sreesanth    19     10   4   0  190.000000
## 10         RP Singh     1      1   0   0  100.000000
print(extras)
##    total  wides  noballs  legbyes  byes  penalty  extras
## 0    370      6        0        8     0        0      14

2.2 Intl. T20 -Team batsmen partnership (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches"
path=os.path.join(dir1,".\\South Africa-Australia-2009-03-27.csv")
sa_aus=pd.read_csv(path)
yka.teamBatsmenPartnershipMatch(sa_aus,'Australia','New Zealand',plot=True)

2.3 Intl. T20 -Team bowling scorecard match (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches"
path=os.path.join(dir1,".\\Sri Lanka-West Indies-2012-09-28.csv")
sl_wi=pd.read_csv(path)
a=yka.teamBowlingScorecardMatch(sl_wi,'Sri Lanka')
print(a)
##          bowler  overs  runs  maidens  wicket  econrate
## 0    A Mohammed      2    13        0       0       6.5
## 1  SA Campbelle      1     8        0       1       8.0
## 2     SC Selman      1     3        0       0       3.0
## 3      SF Daley      2     5        0       1       2.5
## 4     SR Taylor      2     4        0       1       2.0
## 5     TD Smartt      2    17        0       0       8.5

2.4 Intl. T20 -Match Worm chart (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-Matches"
path=os.path.join(dir1,".\\England-India-2012-09-29.csv")
eng_ind=pd.read_csv(path)
yka.matchWormChart(eng_ind,"England", "India")

path=os.path.join(dir1,".\\Bangladesh-Ireland-2015-12-05.csv")
ban_ire=pd.read_csv(path)
yka.matchWormChart(ban_ire,"Bangladesh", "Ireland")

2.5 Intl. T20 -Team Batting partnerships all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"India-England-allMatches.csv")
dc_mi_matches = pd.read_csv(path)
theTeam='India'
m=yka.teamBatsmenPartnershiOppnAllMatches(dc_mi_matches,theTeam,report="detailed", top=4)
print(m)
##      batsman  totalPartnershipRuns    non_striker  partnershipRuns
## 0   SK Raina                   265      G Gambhir                2
## 1   SK Raina                   265       KL Rahul               40
## 2   SK Raina                   265      MK Tiwary               24
## 3   SK Raina                   265       MS Dhoni              124
## 4   SK Raina                   265        P Kumar                0
## 5   SK Raina                   265      PP Chawla                4
## 6   SK Raina                   265       R Ashwin                1
## 7   SK Raina                   265      RG Sharma               16
## 8   SK Raina                   265        V Kohli               47
## 9   SK Raina                   265   Yuvraj Singh                7
## 10  MS Dhoni                   264       A Mishra                1
## 11  MS Dhoni                   264      AT Rayudu               18
## 12  MS Dhoni                   264      HH Pandya                8
## 13  MS Dhoni                   264      IK Pathan                2
## 14  MS Dhoni                   264      JJ Bumrah                2
## 15  MS Dhoni                   264      MK Pandey                3
## 16  MS Dhoni                   264  Parvez Rasool               21
## 17  MS Dhoni                   264       R Ashwin               11
## 18  MS Dhoni                   264      RA Jadeja               11
## 19  MS Dhoni                   264      RG Sharma                9
## 20  MS Dhoni                   264        RR Pant                6
## 21  MS Dhoni                   264     RV Uthappa                5
## 22  MS Dhoni                   264       SK Raina               98
## 23  MS Dhoni                   264      YK Pathan               36
## 24  MS Dhoni                   264   Yuvraj Singh               33
## 25   V Kohli                   236      AM Rahane                3
## 26   V Kohli                   236      G Gambhir               78
## 27   V Kohli                   236       KL Rahul               46
## 28   V Kohli                   236      RG Sharma                2
## 29   V Kohli                   236     RV Uthappa                4
## 30   V Kohli                   236       S Dhawan               45
## 31   V Kohli                   236       SK Raina               48
## 32   V Kohli                   236   Yuvraj Singh               10
## 33     M Raj                   176       A Sharma                2
## 34     M Raj                   176         H Kaur               18
## 35     M Raj                   176      J Goswami                6
## 36     M Raj                   176        KV Jain                5
## 37     M Raj                   176       L Kumari                5
## 38     M Raj                   176    N Niranjana                3
## 39     M Raj                   176       N Tanwar               17
## 40     M Raj                   176        PG Raut               41
## 41     M Raj                   176     R Malhotra                5
## 42     M Raj                   176     S Mandhana                8
## 43     M Raj                   176         S Naik               10
## 44     M Raj                   176       S Pandey               19
## 45     M Raj                   176       SK Naidu               37

2.6 Intl. T20 -Team Batsmen vs Bowlers all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"Ireland-Netherlands-allMatches.csv")
ire_nl_matches = pd.read_csv(path)
yka.teamBatsmenVsBowlersOppnAllMatches(ire_nl_matches,'Ireland',"Netherlands",plot=True,top=3,runsScored=10)

2.7 Intl. T20 -Team Bowling scorecard all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\IntlT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"Bangladesh-Nepal-allMatches.csv")
bang_nep_matches = pd.read_csv(path)
scorecard=yka.teamBowlingScorecardOppnAllMatches(bang_nep_matches,'Bangladesh',"Nepal")
print(scorecard)
##         bowler  overs  runs  maidens  wicket   econrate
## 0      B Regmi      3    14        0       1   4.666667
## 3   SP Gauchan      4    40        0       1  10.000000
## 1   JK Mukhiya      2    16        0       0   8.000000
## 2     P Khadka      3    23        0       0   7.666667
## 4    Sagar Pun      1    16        0       0  16.000000
## 5  Sompal Kami      2    21        0       0  10.500000

2.8 Intl. T20 -Team Batsmen vs Bowlers all Oppositions (Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\\IntlT20-allMatchesAllOpposition\\"
path=os.path.join(dir1,"Australia-allMatchesAllOpposition.csv")
aus_matches = pd.read_csv(path)
yka.teamBatsmenVsBowlersAllOppnAllMatches(aus_matches,"Australia",plot=True,top=3,runsScored=40)

2.9 Intl. T20 -Wins vs Losses of a team against all other teams (Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\\IntlT20-allMatchesAllOpposition\\"
path=os.path.join(dir1,"South Africa-allMatchesAllOpposition.csv")
sa_matches = pd.read_csv(path)
team1='South Africa'
yka.plotWinLossByTeamAllOpposition(sa_matches,team1,plot="detailed")

2.10 Intl. T20 -Batsmen analysis (Class 4)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\\IntlT20-BattingBowlingDetails\\"
# Rohit Sharma
name="RG Sharma"
team='India'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeAverageRuns(df,name)

# MJ Guptill
name="MJ Guptill"
team='New Zealand'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeStrikeRate(df,name)

2.11 Intl. T20 -Bowler analysis (Class 4)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyT20\\\IntlT20-BattingBowlingDetails\\"
# Shakib Al Hasan
name="Shakib Al Hasan"
team='Bangladesh'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanEconomyRate(df,name)

# Rashid Khan
name="SL Malinga"
team='Sri Lanka'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsAgainstOpposition(df,name)

3. Big Bash League

The following functions for added to handle BBL teams

  1. saveAllMatchesBetween2BBLTeams()
  2. saveAllMatchesAllOppositionBBLT20

The BBL teams are included are Adelaide Strikers, Brisbane Heat, Hobart Hurricanes, Melbourne Renegades, Perth Scorchers, Sydney Sixers, Sydney Thunder

To use the yorkpy functions first the YAML files have to be converted into pandas dataframe and then saved as CSV as shown below

import os
import yorkpy.analytics as yka
os.chdir('C:\\software\\cricket-package\\yorkpyBBL\\bbl')
#1. Convert all YAML files to dataframes and save as CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\BBLT20-Matches")
#2. Save all matches between 2 BBL teams
dir1='C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches'
#yka.saveAllMatchesBetween2BBLTeams(dir1)
#3. Save T20 matches between a BBL team and all other teams
dir1='C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches'
#yka.saveAllMatchesAllOppositionBBLT20(dir1)
#4. Get the batting details
dir1='C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches'
#yka.getTeamBattingDetails("Adelaide Strikers",dir=dir1, save=True)
#yka.getTeamBattingDetails("Brisbane Heat",dir=dir1,save=True)
#yka.getTeamBattingDetails("Hobart Hurricanes",dir=dir1,save=True)
#...
# Get the bowling details
dir1='C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches'
#yka.getTeamBowlingDetails("Adelaide Strikers",dir=dir1, save=True)
#yka.getTeamBowlingDetails("Brisbane Heat",dir=dir1,save=True)
#yka.getTeamBowlingDetails("Hobart Hurricanes",dir=dir1,save=True)
#...

The functions below perform analysis on the generated files from above. The YAML files have already been converted and are available at Github at BBL

3.1 Big Bash League – Team score card (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches"
path=os.path.join(dir1,".\\Adelaide Strikers-Brisbane Heat-2012-12-13.csv")
as_bh=pd.read_csv(path)
scorecard,extras=yka.teamBattingScorecardMatch(as_bh,"Brisbane Heat")
print(scorecard)
##          batsman  runs  balls  4s  6s          SR
## 0  LA Pomersbach    65     42   8   2  154.761905
## 1       JR Hopes     1      2   0   0   50.000000
## 2       JA Burns    37     31   2   2  119.354839
## 3   DT Christian    12     15   0   0   80.000000
## 4    NLTC Perera    12      4   0   2  300.000000
## 5        CA Lynn    19     18   1   1  105.555556
## 6    BCJ Cutting    13      5   0   2  260.000000
## 7     PJ Forrest    12      8   0   1  150.000000
## 8     CD Hartley     5      2   1   0  250.000000
print(extras)
##    total  wides  noballs  legbyes  byes  penalty  extras
## 0    371     10        2        5     0        0      17

3.2 Big Bash League -Team batsmen vs Bowlers (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches"
path=os.path.join(dir1,".\\Hobart Hurricanes-Melbourne Renegades-2012-01-18.csv")
hh_mr=pd.read_csv(path)
yka.teamBatsmenVsBowlersMatch(hh_mr,'Hobart Hurricanes','Melbourne Renegades',plot=True)

3.3 Big Bash League -Team bowling scorecard match (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches"
path=os.path.join(dir1,".\\Melbourne Stars-Sydney Thunder-2016-01-24.csv")
ms_st=pd.read_csv(path)
a=yka.teamBowlingScorecardMatch(ms_st,'Sydney Thunder')
print(a)
##           bowler  overs  runs  maidens  wicket   econrate
## 0        A Zampa      4    32        0       2   8.000000
## 1  BW Hilfenhaus      2    21        0       0  10.500000
## 2      DJ Hussey      1     9        0       1   9.000000
## 3     DJ Worrall      3    42        0       0  14.000000
## 4      EP Gulbis      2    19        0       0   9.500000
## 5        MA Beer      3    25        0       1   8.333333
## 6     MP Stoinis      4    30        0       3   7.500000

3.4 Big Bash League – Match Worm chart (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-Matches"
path=os.path.join(dir1,".\\Sydney Sixers-Melbourne Stars-2011-12-27.csv")
ss_ms=pd.read_csv(path)
yka.matchWormChart(ss_ms,"Melbourne Stars", "Sydney Sixers")

path=os.path.join(dir1,".\\Hobart Hurricanes-Brisbane Heat-2015-01-02.csv")
hh_bh=pd.read_csv(path)
yka.matchWormChart(hh_bh,"Hobart Hurricanes", "Brisbane Heat")

3.5 Big Bash League -Team Batting partnerships all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"Brisbane Heat-Adelaide Strikers-allMatches.csv")
bh_as_matches = pd.read_csv(path)
yka.teamBatsmenPartnershipOppnAllMatchesChart(bh_as_matches,"Brisbane Heat","Adelaide Strikers",plot=True, top=4, partnershipRuns=20)

3.6 Big Bash League -Team Bowling wicket kind all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"Sydney Sixers-Perth Scorchers-allMatches.csv")
ss_ps_matches = pd.read_csv(path)
yka.teamBowlingWicketKindOppositionAllMatches(ss_ps_matches,'Perth Scorchers','Sydney Sixers',plot=True,top=5,wickets=1)

3.7 Big Bash League -Team Bowling scorecard all teams (Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-allMatchesAllOpposition"
path=os.path.join(dir1,"Hobart Hurricanes-allMatchesAllOpposition.csv")
hh_matches = pd.read_csv(path)
scorecard=yka.teamBowlingScorecardAllOppnAllMatches(hh_matches,"Hobart Hurricanes")
print(scorecard)
##              bowler  overs  runs  maidens  wicket   econrate
## 16            B Lee     20   132        0       9   6.600000
## 30         CJ McKay     13   110        0       9   8.461538
## 88    NJ Rimmington     16   103        1       9   6.437500
## 67      JW Hastings     15    88        0       8   5.866667
## 63      JP Faulkner     15   146        0       7   9.733333
## 27        CJ Gannon     17   147        1       7   8.647059
## 93          NM Lyon      8    51        0       7   6.375000
## 20      BCJ Cutting     27   226        0       7   8.370370
## 48          GB Hogg     22   167        0       7   7.590909
## 107       SM Boland     12    96        0       7   8.000000
## 15       B Laughlin     13    99        0       7   7.615385
## 87      MT Steketee     15   134        0       5   8.933333
## 121    Yasir Arafat      9    48        0       4   5.333333
## 96       PJ Cummins      8    83        0       4  10.375000
## 46      Fawad Ahmed     11    64        0       4   5.818182
## 76          MA Beer     12    63        0       4   5.250000
## 108     SNJ O'Keefe     15   104        0       4   6.933333
## 75   M Muralitharan      7    31        0       4   4.428571
## 10           AJ Tye     16   127        0       4   7.937500
## 52          J Botha     13    94        0       4   7.230769
## 56     JL Pattinson      7    71        0       4  10.142857
## 62   JP Behrendorff     16   119        0       4   7.437500
## 3           AC Agar     12    87        0       4   7.250000
## 24     BM Edmondson      4    40        0       4  10.000000
## 37        DJ Hussey      8    47        0       3   5.875000
## 49       GJ Maxwell      8    65        0       3   8.125000
## 84       MN Samuels      4    22        0       3   5.500000
## 81         MG Neser      5    54        0       3  10.800000
## 44     DT Christian      9   114        0       3  12.666667
## 50        GS Sandhu      7    51        0       3   7.285714
## ..              ...    ...   ...      ...     ...        ...
## 43        DP Nannes      8    58        0       1   7.250000
## 51         IA Moran      4    25        0       1   6.250000
## 55         JK Lalor     10    82        0       1   8.200000
## 54        JH Kallis      3    18        0       1   6.000000
## 73   LR Butterworth      4    25        0       1   6.250000
## 4      AC McDermott      2    28        0       1  14.000000
## 70         LA Doran      4    38        0       1   9.500000
## 69    KW Richardson      6    44        0       1   7.333333
## 119     WD Sheridan      2     6        0       0   3.000000
## 2       AB McDonald      1    15        0       0  15.000000
## 115      TD Andrews      3    23        0       0   7.666667
## 11          AK Heal      4    33        0       0   8.250000
## 7        AD Russell      4    40        0       0  10.000000
## 8          AJ Finch      2    15        0       0   7.500000
## 9         AJ Turner      3    28        0       0   9.333333
## 60        JM Mennie      1    20        0       0  20.000000
## 18        BA Stokes      1     9        0       0   9.000000
## 26         CH Gayle      1    16        0       0  16.000000
## 28         CJ Green      4    44        0       0  11.000000
## 95   PD Collingwood      2    20        0       0  10.000000
## 31       CJ Simmons      4    21        0       0   5.250000
## 59       JM Holland      3    34        0       0  11.333333
## 36         DJ Bravo      6    64        0       0  10.666667
## 38     DJ Pattinson      2    16        0       0   8.000000
## 41       DJ Worrall      8    90        0       0  11.250000
## 72      LN O'Connor      6    56        0       0   9.333333
## 71        LJ Wright      3    27        0       0   9.000000
## 68       KA Pollard      1     7        0       0   7.000000
## 58       JM Herrick      4    23        0       0   5.750000
## 92       NM Hauritz      5    42        0       0   8.400000
## 
## [122 rows x 6 columns]

3.8 Big Bash League -Plot wins vs losses against all teams(Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-allMatchesAllOpposition"
path=os.path.join(dir1,"Sydney Sixers-allMatchesAllOpposition.csv")
ss_matches = pd.read_csv(path)
yka.plotWinLossByTeamAllOpposition(ss_matches,'Sydney Sixers')

3.9 Big Bash League -Wins vs losses by toss decision (Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-allMatchesAllOpposition"
path=os.path.join(dir1,"Adelaide Strikers-allMatchesAllOpposition.csv")
as_matches = pd.read_csv(path)
yka.plotWinsByRunOrWicketsAllOpposition(as_matches,'Adelaide Strikers')

3.10 Big Bash League -Batsmen Analysis (Class 4)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-BattingBowlingDetails"
# CA Lynn
name="CA Lynn"
team='Brisbane Heat'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsStrikeRate(df,name)

# UT Khawaja
name="UT Khawaja"
team='Sydney Thunder'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsAgainstOpposition(df,name)

3.11Big Bash League – Bowler analysis (Class 4)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyBBL\\BBLT20-BattingBowlingDetails"
# CJ McKay
name="CJ McKay"
team='Sydney Thunder'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgWickets(df,name)

# AU Rashid
name="AU Rashid"
team='Adelaide Strikers'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgEconRate(df,name)

4. Natwest T20 Blast

The following functions for added to handle Natwest T20 teams

  1. saveAllMatchesBetween2NWBTeams()
  2. saveAllMatchesAllOppositionNWBT20

The Natwest teams are
Derbyshire, Durham, Essex, Glamorgan, Gloucestershire, Hampshire, Kent,Lancashire, Leicestershire, Middlesex,Northamptonshire, Nottinghamshire, Somerset, Surrey, Sussex, Warwickshire, Worcestershire,Yorkshire

In order to perform analysis with yorkpy, the YAML data has to be converted to pandas dataframe and saves as CSV as shown

#import os
#import yorkpy.analytics as yka
#os.chdir('C:\\software\\cricket-package\\yorkpyNWB\\nwb')
#1. Convert YAML to dataframes and save as CSV
#yka.convertAllYaml2PandasDataframesT20(".", "..\\NWBT20-Matches")
#2. Save all matches between 2 NWBT20 teams
#dir1='C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-Matches'
#yka.saveAllMatchesBetween2NWBTeams(dir1)
#3. Save all matches between a NWB T20 team and all other teams
#dir1='C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-Matches'
#yka.saveAllMatchesAllOppositionNWBT20(dir1)
#4. Compute the batting details
dir1='C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-Matches'
#yka.getTeamBattingDetails("Derbyshire",dir=dir1, save=True)
#yka.getTeamBattingDetails("Durham",dir=dir1,save=True)
#yka.getTeamBattingDetails("Essex",dir=dir1,save=True)
#..
#5. Compute bowling details
dir1='C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-Matches'
#yka.getTeamBowlingDetails("Derbyshire",dir=dir1, save=True)
#yka.getTeamBowlingDetails("Durham",dir=dir1,save=True)
#yka.getTeamBowlingDetails("Essex",dir=dir1,save=True)
#...

Once the data is converted all yorkpy functions can be used. This has already been done and is available at github NWB

4.1 Natwest T20 Blast – Team score card (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\\yorkpyNWB\\NWBT20-Matches"
path=os.path.join(dir1,".\\Durham-Yorkshire-2016-08-20.csv")
d_y=pd.read_csv(path)
scorecard,extras=yka.teamBattingScorecardMatch(d_y,"Durham")
print(scorecard)
##           batsman  runs  balls  4s  6s          SR
## 0     MD Stoneman    25     20   4   0  125.000000
## 1     KK Jennings    11     13   1   0   84.615385
## 2       BA Stokes    56     37   4   3  151.351351
## 3   MJ Richardson    29     23   4   1  126.086957
## 4     JTA Burnham    17     15   1   1  113.333333
## 5      RD Pringle    10      9   1   0  111.111111
## 6  PD Collingwood     2      3   0   0   66.666667
## 7        U Arshad     1      1   0   0  100.000000
print(extras)
##    total  wides  noballs  legbyes  byes  penalty  extras
## 0    305      2        0        5     0        0       7

4.2 Natwest T20 Blast -Team batsmen vs Bowlers (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\\yorkpyNWB\\NWBT20-Matches"
path=os.path.join(dir1,".\\Derbyshire-Lancashire-2016-07-13.csv")
d_l=pd.read_csv(path)
yka.teamBatsmenVsBowlersMatch(d_l,'Lancashire','Derbyshire',plot=True)

4.3 Natwest T20 Blast -Team bowling scorecard match (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\\yorkpyNWB\\NWBT20-Matches"
path=os.path.join(dir1,".\\Essex-Surrey-2016-05-20.csv")
e_s=pd.read_csv(path)
a=yka.teamBowlingScorecardMatch(e_s,'Essex')
print(a)
##           bowler  overs  runs  maidens  wicket   econrate
## 0  Azhar Mahmood      3    38        0       4  12.666667
## 1       GJ Batty      4    33        0       1   8.250000
## 2       JE Burke      1    18        0       0  18.000000
## 3     MW Pillans      3    28        0       0   9.333333
## 4      SM Curran      4    23        0       2   5.750000
## 5      TK Curran      4    21        0       3   5.250000

4.4 Natwest T20 Blast -Match Worm chart (Class 1)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\\yorkpyNWB\\NWBT20-Matches"
path=os.path.join(dir1,".\\Gloucestershire-Glamorgan-2016-06-10.csv")
ss_ms=pd.read_csv(path)
yka.matchWormChart(ss_ms,"Gloucestershire", "Glamorgan")

path=os.path.join(dir1,".\\Leicestershire-Northamptonshire-2016-05-20.csv")
hh_bh=pd.read_csv(path)
yka.matchWormChart(hh_bh,"Northamptonshire", "Leicestershire")

4.5 Natwest T20 Blast -Team Batting partnerships all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"Hampshire-Sussex-allMatches.csv")
h_s_matches = pd.read_csv(path)
yka.teamBatsmenPartnershipOppnAllMatchesChart(h_s_matches,"Hampshire","Sussex",plot=True, top=4, partnershipRuns=10)

4.6 Natwest T20 Blast -Team Bowling wicket kind all matches 2 teams (Class 2)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-allMatchesBetween2Teams"
path=os.path.join(dir1,"Kent-Somerset-allMatches.csv")
k_s_matches = pd.read_csv(path)
yka.teamBowlersVsBatsmenOppnAllMatches(k_s_matches,'Kent','Somerset',plot=True,
top=5,runsConceded=10)

4.7 Natwest T20 Blast -Team Bowling scorecard all teams (Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-allMatchesAllOpposition"
path=os.path.join(dir1,"Middlesex-allMatchesAllOpposition.csv")
m_matches = pd.read_csv(path)
scorecard=yka.teamBowlingScorecardAllOppnAllMatches(m_matches,"Middlesex")
print(scorecard)
##               bowler  overs  runs  maidens  wicket   econrate
## 1             AJ Tye      8    75        0       6   9.375000
## 5         BAC Howell      8    41        0       5   5.125000
## 26         GR Napier      7    65        0       5   9.285714
## 15        DI Stevens      4    31        0       4   7.750000
## 19       DW Lawrence      6    37        0       4   6.166667
## 32       JW Dernbach      4    33        0       3   8.250000
## 7          BTJ Wheal      4    43        0       3  10.750000
## 18         DR Briggs      4    24        0       3   6.000000
## 50     RK Kleinveldt      4    24        0       3   6.000000
## 46         R McLaren      7    59        0       3   8.428571
## 47         R Rampaul      3    21        0       3   7.000000
## 34         L Gregory      6    51        0       2   8.500000
## 33   KMDN Kulasekara      2    24        0       2  12.000000
## 40          MG Hogan      3    17        0       2   5.666667
## 43        MTC Waller      4    31        0       2   7.750000
## 49        RJ Gleeson      4    20        0       2   5.000000
## 48  RE van der Merwe      5    24        0       2   4.800000
## 51  RN ten Doeschate      4    32        0       2   8.000000
## 53        S Prasanna      4    20        0       2   5.000000
## 56           SW Tait      3    17        0       2   5.666667
## 57     Shahid Afridi      8    55        0       2   6.875000
## 59  T van der Gugten      3    13        1       2   4.333333
## 64          TS Mills      3    34        0       2  11.333333
## 65          WAT Beer      4    23        0       2   5.750000
## 31          JH Davey      4    28        0       2   7.000000
## 68         ZS Ansari      3    16        0       2   5.333333
## 25         GM Andrew      3    19        0       2   6.333333
## 23          GJ Batty      6    55        0       2   9.166667
## 16          DJ Bravo      3    27        0       2   9.000000
## 41          MR Quinn      6    65        0       1  10.833333
## ..               ...    ...   ...      ...     ...        ...
## 24     GL van Buuren      7    49        0       1   7.000000
## 37           MD Hunn      3    35        0       1  11.666667
## 36        LC Norwell      6    62        0       1  10.333333
## 29       JC Tredwell      4    35        0       1   8.750000
## 35         LA Dawson      6    53        0       1   8.833333
## 62           TL Best      4    51        0       0  12.750000
## 58         T Westley      2    12        0       0   6.000000
## 4         Azharullah      3    24        0       0   8.000000
## 60     TD Groenewald      1    21        0       0  21.000000
## 61         TK Curran      4    35        0       0   8.750000
## 38         MD Taylor      3    30        0       0  10.000000
## 30        JG Myburgh      1     5        0       0   5.000000
## 8          C Overton      2    18        0       0   9.000000
## 2        Ashar Zaidi      1     5        0       0   5.000000
## 66          WR Smith      2    25        0       0  12.500000
## 28         J Overton      2    24        0       0  12.000000
## 6          BJ Taylor      1     6        0       0   6.000000
## 22          GG White      4    31        0       0   7.750000
## 55          SP Crook      1     9        0       0   9.000000
## 39        ME Claydon      4    40        0       0  10.000000
## 52         RS Bopara      4    32        0       0   8.000000
## 10           CD Nash      2    19        0       0   9.500000
## 11         CH Morris      4    36        0       0   9.000000
## 12         DA Cosker      3    32        0       0  10.666667
## 13      DA Griffiths      4    39        0       0   9.750000
## 45          PD Trego      1    11        0       0  11.000000
## 44   PA van Meekeren      2    19        0       0   9.500000
## 42          MS Crane      2    25        0       0  12.500000
## 20        FK Cowdrey      1    19        0       0  19.000000
## 14        DD Masters      2    16        0       0   8.000000
## 
## [69 rows x 6 columns]

4.8 Natwest T20 Blast -Plot wins vs losses against all teams(Class 3)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-allMatchesAllOpposition"
path=os.path.join(dir1,"Warwickshire-allMatchesAllOpposition.csv")
w_matches = pd.read_csv(path)
yka.plotWinLossByTeamAllOpposition(w_matches,'Warwickshire')

4.9 Natwest T20 Blast -Batsmen Analysis (Class 4)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-BattingBowlingDetails"
# M Klinger
name="M Klinger"
team='Gloucestershire'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsAgainstOpposition(df,name)

# CA Ingram
name="CA Ingram"
team='Glamorgan'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeStrikeRate(df,name)

4.11 Natwest T20 Blast -Bowler analysis (Class 4)

import os
import pandas as pd
import yorkpy.analytics as yka
dir1="C:\\software\\cricket-package\\yorkpyNWB\\NWBT20-BattingBowlingDetails"
# BAC Howell
name="BAC Howell"
team='Gloucestershire'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgEconRate(df,name)

# GR Napier
name="GR Napier"
team='Essex'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsVenue(df,name)

Note: yorkpy will work for all T20 leagues which are in YAML format as specified in Cricsheet.

You can clone/fork the latest code for yorkpy from github yorkpy

The data for IPL, Intl. T20, BBL and Natwest T20 have already been converted into pandas dataframes and saved as CSVs. You can download the converted files from Github at [allYorkpyT20Data])(https://github.com/tvganesh/allYorkpyT20Data)

Conclusion This post shows the kind of detailed analysis that can be performed with yorkpy. In fact with all the converted data it should be possible to also train a Machine Learning model, which I will probably keep for another day. You could go ahead and use the data in other innovative ways. Do keep me posted if you do!!

Important note: Do check out my other posts using yorkpy at yorkpy-posts

Have fun with yorkpy!!

See also
1. Take 4+: Presentations on ‘Elements of Neural Networks and Deep Learning’ – Parts 1-8
2. My book ‘Practical Machine Learning in R and Python: Third edition’ on Amazon
3. Hand detection through Haartraining: A hands-on approach
4.My book ‘Deep Learning from first principles:Second Edition’ now on Amazon
5. Introducing QCSimulator: A 5-qubit quantum computing simulator in R
6. The 3rd paperback & kindle editions of my books on Cricket, now on Amazon

To see all posts click Index of posts

Pitching yorkpy … in the block hole – Part 4

A good programmer is someone who always looks both ways before crossing a one-way street.  Doug Linder

There are two ways to write error-free programs; only the third one works. Alan J. Perlis

In order to understand recursion, one must first understand recursion. Anonymous

This is the fourth and final part of my Python package yorkpy. In this part yorkpy, the python avatar of my R package yorkr see Introducing cricket package yorkr: Part 1- Beaten by sheer pace!, develops wings and is prepared for take-off. The yorkpy package uses data from Cricsheet

You can clone/download the code at Github yorkpy
This post has been published to RPubs at yorkpy-Part4
You can download this post as PDF at IPLT20-yorkpy-part4
You can download all the data used in this post and the previous post at yorkpyData

This post is a continuation of the earlier posts on yorkpy

1. Pitching yorkpy . short of good length to IPL – Part 1 In this part I included functions that convert the yaml data of IPL matches into Pandas dataframe which are then saved as CSV. This part can perform analysis of individual IPL matches. Note The converted data is available at yorkpyData
2. Pitching yorkpy.on the middle and outside off-stump to IPL – Part 2 This part included functions to create a large data frame for head-to-head confrontation between any 2IPL teams says CSK-MI, DD-KKR etc, which can be saved as CSV. Analysis is then performed on these team-2-team confrontations. Note The converted data is available at yorkpyData
3. Pitching yorkpy.swinging away from the leg stump to IPL – Part 3 The 3rd part includes the performance of any IPL team against all other IPL teams. The data can also be saved as CSV.Note The converted data is available at yorkpyData

Note: If you would like to do a similar analysis for a different set of batsman and bowlers, you can clone/download my skeleton yorkpy-template from Github (which is the R Markdown file I have used for the analysis below).

This 4th and final part includes analysis of batting and bowling performances of any IPL player. The batting and bowling details for all teams have already been converted and are available at IPLT20-Batting-BowlingDetails

This part includes the following new functions

Batsman functions

  1. batsmanRunsVsDeliveries
  2. batsmanFoursSixes
  3. batsmanDismissals
  4. batsmanRunsVsStrikeRate
  5. batsmanMovingAverage
  6. batsmanCumulativeAverageRuns
  7. batsmanCumulativeStrikeRate
  8. batsmanRunsAgainstOpposition
  9. batsmanRunsVenue

Bowler functions

  1. bowlerMeanEconomyRate
  2. bowlerMeanRunsConceded
  3. bowlerMovingAverage
  4. bowlerCumulativeAvgWickets
  5. bowlerCumulativeAvgEconRate
  6. bowlerWicketPlot
  7. bowlerWicketsAgainstOpposition
  8. bowlerWicketsVenue

A. Batsman functions

1. Get IPL Team Batting details

The function below gets the overall IPL team batting details based on the CSV files that were saved for IPL T20 matches. This is currently also available in Github at yorkpyData. The batting details of the IPL team in each match is created and a huge data frame is created by combining the batting details from each match. This can be saved as a csv file with name as for e.g. Delhi Daredevils-BattingDetails.csv.

dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
#csk_details = yka.getTeamBattingDetails("Chennai Super Kings",dir=dir1, save=True)
#dd_details = yka.getTeamBattingDetails("Delhi Daredevils",dir=dir1,save=True)
#kkr_details = yka.getTeamBattingDetails("Kolkata Knight Riders",dir=dir1,save=True)

2. Get IPL batsman details

This function is used to get the individual IPL T20 batting record for a the specified batsman of the team as in the functions below.

For the batsmen functions below I have chosen Rishabh Pant, Kane Williamson and Ambati Rayudu for the analysis as they top the batting lists. You can choose any IPL batsmen for the analysis

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
rpant=yka.getBatsmanDetails(team,name,dir=dir1)

3 Batsman Runs vs Deliveries (in IPL matches)

This functions plots the runs vs deliveries faced for batsman

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsDeliveries(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsDeliveries(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsDeliveries(df,name)

4. Batsman fours and sixes (in IPL matches)

This plots the fours, sixes and the total runs for a batsman

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanFoursSixes(df,name)


# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanFoursSixes(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanFoursSixes(df,name)

5. Batsman dismissals (in IPL matches)

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanDismissals(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanDismissals(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanDismissals(df,name)

6. Batsman Runs vs Strike Rate (in IPL matches)

The plots below give the Runs vs Strike rate for batsmen

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsStrikeRate(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsStrikeRate(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVsStrikeRate(df,name)

7. Batsman Moving average of runs (in IPL matches)

The plots below compute and plot the moving average of batsmen

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanMovingAverage(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanMovingAverage(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanMovingAverage(df,name)

8. Batsman Cumulative average of runs (in IPL matches)

The functions below plot the cumulative average of the batsmen

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeAverageRuns(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeAverageRuns(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeAverageRuns(df,name)

9. Batsman Cumulative Strike Rate (in IPL matches)

The functions below plot the cumulative strike rate of the batsmen

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeStrikeRate(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeStrikeRate(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanCumulativeStrikeRate(df,name)

10. Batsman performance against opposition (in IPL matches)

The plots below show how the batsmen performed against other IPL teams

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsAgainstOpposition(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsAgainstOpposition(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsAgainstOpposition(df,name)

11. Batsman performance at different venues (in IPL matches)

The plots below show how the batsmen performed at different venues

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Rishabh Pant
name="RR Pant"
team='Delhi Daredevils'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVenue(df,name)

# 2. Kane Williamson
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="KS Williamson"
team='Sunrisers Hyderabad'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVenue(df,name)

#3. Ambati Rayudu
name="AT Rayudu"
team='Mumbai Indians'
df=yka.getBatsmanDetails(team,name,dir=dir1)
yka.batsmanRunsVenue(df,name)

B. Bowler functions

12. Get bowling details in IPL matches

The function below gets the overall team IPL T20 bowling details based on the RData file available in IPL T20 matches. This is currently also available in Github at yorkpyData. The IPL T20 bowling details of the IPL team in each match is created, and a huge data frame is created by stacking the individual dataframes. This can be saved as a CSV file for e.g. Chennai Super Kings-BowlingDetails.csv

dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
#kkr_bowling = yka.getTeamBowlingDetails("Kolkata Knight Riders",dir=dir1,save=True)
#csk_bowling = yka.getTeamBowlingDetails("Chennai Super Kings",dir=dir1,save=True)
#kxip_bowling = yka.getTeamBowlingDetails("Kings XI Punjab",dir=dir1,save=True)

13. Get bowling details of the individual IPL bowlers

This function is used to get the individual bowling record for a specified bowler of the country as in the functions below.

The plots below deal with bowler’s performance. For this analysis I have chosen Amit Mishra, Piyush Chawla and Bhuvaneshwar Kumar for the analysis. You can chose any other IPL bowler

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
#df=yka.getBowlerWicketDetails(team,name,dir=dir1)

14. Bowler Economy Rate (in IPL matches)

The plots below show the economy rate of the selected bowlers

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanEconomyRate(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanEconomyRate(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanEconomyRate(df,name)

15. Bowler Mean Runs conceded (in IPL matches)

The plots below show the mean runs conceded by the selected bowlers

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanRunsConceded(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanRunsConceded(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMeanRunsConceded(df,name)

16. Moving average of wickets for bowler (in IPL matches)

The moving average of the bowlers are plotted below

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMovingAverage(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMovingAverage(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerMovingAverage(df,name)

17. Cumulative average wickets for bowler (in IPL matches)

The cumulative average wickets for each bowler is computed and plotted

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgWickets(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgWickets(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgWickets(df,name)

18. Cumulative average economy rate for bowler (in IPL matches)

The plots below give the cumulative average economy rate for each bowler

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgEconRate(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgEconRate(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerCumulativeAvgEconRate(df,name)

19. Bowler wicket plot (in IPL matches)

The plots below give the over vs wickets for bowlers

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketPlot(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketPlot(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketPlot(df,name)

20. Bowler wicket against opposition (in IPL matches)

The performance of the bowlers against different IPL teams is shown below

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsAgainstOpposition(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsAgainstOpposition(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsAgainstOpposition(df,name)

21. Bowler wicket in different venues (in IPL matches)

The plots below show how the bowlers perform at different venues

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
# 1. Amit Mishra
name="A Mishra"
team='Delhi Daredevils'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsVenue(df,name)

# 2. Piyush Chawla
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data3"
name="PP Chawla"
team='Kolkata Knight Riders'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsVenue(df,name)

#3. Bhuvneshwar Kumar
name="B Kumar"
team='Sunrisers Hyderabad'
df=yka.getBowlerWicketDetails(team,name,dir=dir1)
yka.bowlerWicketsVenue(df,name)

Note:You can clone/download the code at Github yorkpy

Important note: Do check out my other posts using yorkpy at yorkpy-posts

Conclusion: This concludes the python package yorkpy. Go ahead and give yorkpy a spin!

Also see
1. Take 4+: Presentations on ‘Elements of Neural Networks and Deep Learning’ – Parts 1-8
2. My book ‘Practical Machine Learning in R and Python: Third edition’ on Amazon
3. Hand detection through Haartraining: A hands-on approach
4.My book ‘Deep Learning from first principles:Second Edition’ now on Amazon
5. Big Data-1: Move into the big league:Graduate from Python to Pyspark
6. Cricpy takes a swing at the ODIs

To see all posts click Index of posts

Pitching yorkpy…on the middle and outside off-stump to IPL – Part 2

When you come to a fork in the road, take it.
You’ve got to be very careful if you don’t know where you are going, because you might not get there

      Yogi Berra

Try taking his (Rahul Dravid’s) wicket in the first 15 minutes. If you can’t then only try to take the remaining wickets

      Steve Waugh
      

Introduction

This post is a follow-up to my previous post, Pitching yorkpy…short of good length to IPL-Part 1, in which I analyzed individual IPL matches. In this 2nd post I analyze the data in all matches between any 2 IPL teams, say CSK-RCB, MI-KKR or DD-RPS and so on. As I have already mentioned yorky is the python clone of my R packkage yorkr and this post is almost a mirror image of my post with yorkr namely yorkr crashes the IPL party! – Part 2. The signatures of yorkpy and yorkr are identical and will work in amost the same way. yorkpy, like yorkr, uses data from Cricsheet

You can clone/download the code at Github yorkpy
This post has been published to RPubs at yorkpy-Part2
You can download this post as PDF at IPLT20-yorkpy-part2
You can download all the data used in this post and the previous post at yorkpyData

Note: If you would like to do a similar analysis for a different set of batsman and bowlers, you can clone/download my skeleton yorkpy-template from Github (which is the R Markdown file I have used for the analysis below).

2. Get data for all T20 matches between 2 teams

We can get all IPL T20 matches between any 2 teams using the function below. The dir parameter should point to the folder which has the IPL T20 csv files of the individual matches (see Pitching yorkpy…short of good length to IPL-Part 1). This function creates a data frame of all the IPL T20 matches and and also saves the dataframe as CSV file if save=True. If save=False the dataframe is just returned and not saved.

import pandas as pd
import os
import yorkpy.analytics as yka
#dir1= "C:\\software\\cricket-package\\yorkpyPkg\\yorkpyData\\IPLConverted"
#yka.getAllMatchesBetweenTeams("Kolkata Knight Riders","Delhi Daredevils",dir=dir1,save=True)

3. Save data for all matches between all combination of 2 teams

This can be done locally using the function below. You could use this function to combine all IPL Twenty20 matches between any 2 IPL teams into a single dataframe and save it in the current folder. All the dataframes for all combinations have already been done and are available as CSV files in Github at yorkpyData

import pandas as pd
import os
import yorkpy.analytics as yka
#dir1= "C:\\software\\cricket-package\\yorkpyPkg\\yorkpyData\\IPLConverted"
#yka.saveAllMatchesBetween2IPLTeams(dir1)

Note: In the functions below, I have randomly chosen any 2 IPL teams and analyze how the teams have performed against each other in different areas. You are free to choose any 2 combination of IPL teams for your analysis

4.Team Batsmen partnership in Twenty20 (all matches with opposing IPL team – summary)

The function below computes the highest partnerships between the 2 IPL teams Chennai Superkings and Delhi Daredevils. Any other 2 IPL team could have also been chosen. The summary gives the top 3 batsmen for Delhi Daredevils namely Sehwag, Gambhir and Dinesh Karthik when the report=‘summary’

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Chennai Super Kings-Delhi Daredevils-allMatches.csv")
csk_dd_matches = pd.read_csv(path)
m=yka.teamBatsmenPartnershiOppnAllMatches(csk_dd_matches,'Delhi Daredevils',report="summary")
print(m)
##            batsman  totalPartnershipRuns
## 49        V Sehwag                   233
## 12       G Gambhir                   200
## 21      KD Karthik                   180
## 10       DA Warner                   134
## 4   AB de Villiers                   133

5. Team Batsmen partnership in Twenty20 (all matches with opposing IPL team -detailed)

The function below gives the detailed breakup of partnerships between Deccan Chargers and Mumbai Indians for Deccan Chargers.

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Deccan Chargers-Mumbai Indians-allMatches.csv")
dc_mi_matches = pd.read_csv(path)
theTeam='Deccan Chargers'
m=yka.teamBatsmenPartnershiOppnAllMatches(dc_mi_matches,theTeam,report="detailed", top=4)
print(m)
##          batsman  totalPartnershipRuns      non_striker  partnershipRuns
## 0   AC Gilchrist                   201        A Symonds                0
## 1   AC Gilchrist                   201         HH Gibbs               53
## 2   AC Gilchrist                   201        MD Mishra                0
## 3   AC Gilchrist                   201        RG Sharma               20
## 4   AC Gilchrist                   201    Shahid Afridi                6
## 5   AC Gilchrist                   201         TL Suman                7
## 6   AC Gilchrist                   201       VVS Laxman              115
## 7       S Dhawan                   122         A Mishra                9
## 8       S Dhawan                   122         B Chipli                1
## 9       S Dhawan                   122         CL White                2
## 10      S Dhawan                   122     DT Christian               52
## 11      S Dhawan                   122         IR Jaggi                2
## 12      S Dhawan                   122        JP Duminy                9
## 13      S Dhawan                   122    KC Sangakkara               16
## 14      S Dhawan                   122         PA Patel               22
## 15      S Dhawan                   122          S Sohal                9
## 16     RG Sharma                   103        A Symonds               11
## 17     RG Sharma                   103     AC Gilchrist               18
## 18     RG Sharma                   103         DR Smith                6
## 19     RG Sharma                   103         HH Gibbs                3
## 20     RG Sharma                   103   Jaskaran Singh               15
## 21     RG Sharma                   103        KAJ Roach                4
## 22     RG Sharma                   103        LPC Silva                0
## 23     RG Sharma                   103         TL Suman               14
## 24     RG Sharma                   103  Y Venugopal Rao               32
## 25      HH Gibbs                   102     AC Gilchrist               40
## 26      HH Gibbs                   102         DR Smith               24
## 27      HH Gibbs                   102        MD Mishra               27
## 28      HH Gibbs                   102        RG Sharma                8
## 29      HH Gibbs                   102       VVS Laxman                1
## 30      HH Gibbs                   102  Y Venugopal Rao                2

6. Team Batsmen partnership in Twenty20 – Chart (all matches with opposing IPL team)

The function below plots the partnerships in all matches between 2 IPL teams and plots as chart

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Gujarat Lions-Kings XI Punjab-allMatches.csv")
gl_kxip_matches = pd.read_csv(path)
yka.teamBatsmenPartnershipOppnAllMatchesChart(gl_kxip_matches,'Kings XI Punjab','Gujarat Lions', plot=True, top=4, partnershipRuns=20)

7.Team Batsmen partnership in Twenty20 – Dataframe (all matches with opposing IPL team)

This function does not plot the data but returns the dataframe to the user to plot or manipulate.

Note: Many of the plots include an additional parameters for e.g. plot which is either True or False. The default value is plot=True. When plot=True the plot will be displayed. When plot=False the data frame will be returned to the user. The user can use this to create an interactive charts. The parameter top= specifies the number of top batsmen that need to be included in the chart, and partnershipRuns gives the minimum cutoff runs in partnerships to be considered

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Kolkata Knight Riders-Rising Pune Supergiants-allMatches.csv")
kkr_rps_matches = pd.read_csv(path)
m=yka.teamBatsmenPartnershipOppnAllMatchesChart(kkr_rps_matches,'Rising Pune Supergiants','Kolkata Knight Riders', plot=False, top=5, partnershipRuns=20)
print(m)
##         batsman   non_striker  partnershipRuns
## 0     AM Rahane  F du Plessis               20
## 1     AM Rahane     JA Morkel               16
## 2     AM Rahane   NLTC Perera                6
## 3     AM Rahane     SPD Smith               25
## 4     AM Rahane    UT Khawaja                2
## 5     GJ Bailey     IK Pathan                4
## 6     GJ Bailey     SS Tiwary               28
## 7     GJ Bailey    UT Khawaja                1
## 8      MS Dhoni     IK Pathan                5
## 9      MS Dhoni     JA Morkel                1
## 10     MS Dhoni   NLTC Perera                2
## 11     MS Dhoni      R Ashwin                1
## 12     MS Dhoni      R Bhatia               22
## 13    SPD Smith     AM Rahane               31
## 14  NLTC Perera     AM Rahane               12
## 15  NLTC Perera      MS Dhoni               13

8. Team batsmen versus bowler in Twenty20-Chart (all matches with opposing IPL team)

The plots below provide information on how each of the top batsmen of the IPL teams fared against the opposition bowlers

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Rajasthan Royals-Royal Challengers Bangalore-allMatches.csv")
rr_rcb_matches = pd.read_csv(path)
yka.teamBatsmenVsBowlersOppnAllMatches(rr_rcb_matches,'Rajasthan Royals',"Royal Challengers Bangalore",plot=True,top=3,runsScored=20)

9 Team batsmen versus bowler in Twenty20-Dataframe (all matches with opposing IPL team)

This function provides the bowling performance, the number of overs bowled, maidens, runs conceded. wickets taken and economy rate for the IPL match

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Mumbai Indians-Delhi Daredevils-allMatches.csv")
mi_dd_matches = pd.read_csv(path)
m=yka.teamBatsmenVsBowlersOppnAllMatches(mi_dd_matches,'Delhi Daredevils',"Mumbai Indians",plot=False,top=2,runsScored=50)
print(m)
##       batsman           bowler  runsScored
## 0    V Sehwag          A Nehra         6.0
## 1    V Sehwag       AG Murtaza         6.0
## 2    V Sehwag         AM Nayar        14.0
## 3    V Sehwag         CJ McKay        10.0
## 4    V Sehwag     CRD Fernando         9.0
## 5    V Sehwag         DJ Bravo         9.0
## 6    V Sehwag      DJ Thornely         0.0
## 7    V Sehwag         DR Smith        13.0
## 8    V Sehwag      DS Kulkarni        20.0
## 9    V Sehwag  Harbhajan Singh        54.0
## 10   V Sehwag        JJ Bumrah        19.0
## 11   V Sehwag       KA Pollard        37.0
## 12   V Sehwag         MM Patel        27.0
## 13   V Sehwag          PP Ojha         7.0
## 14   V Sehwag         R Shukla         9.0
## 15   V Sehwag      RJ Peterson         7.0
## 16   V Sehwag         RP Singh        28.0
## 17   V Sehwag       SL Malinga        32.0
## 18   V Sehwag       SM Pollock        25.0
## 19   V Sehwag    ST Jayasuriya        29.0
## 20   V Sehwag           Z Khan        14.0
## 21  JP Duminy      CJ Anderson         3.0
## 22  JP Duminy        HH Pandya         7.0
## 23  JP Duminy  Harbhajan Singh        29.0
## 24  JP Duminy        J Suchith         5.0
## 25  JP Duminy        JJ Bumrah        70.0
## 26  JP Duminy       KA Pollard        29.0
## 27  JP Duminy        KH Pandya         8.0
## 28  JP Duminy       M de Lange         6.0
## 29  JP Duminy   MJ McClenaghan        14.0
## 30  JP Duminy           N Rana         1.0
## 31  JP Duminy          PP Ojha        16.0
## 32  JP Duminy    R Vinay Kumar        18.0
## 33  JP Duminy        RG Sharma         3.0
## 34  JP Duminy          S Gopal         8.0
## 35  JP Duminy       SL Malinga         8.0
## 36  JP Duminy       TG Southee         3.0

10. Team batting scorecard(all matches with opposing IPL team)

This function provides the overall scorecard for an IPL team in all matches against another IPL team. In the snippet below the batting scorecard of RCB is show against CSK. Kohli, Gayle and De villiers lead the pack.

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Royal Challengers Bangalore-Chennai Super Kings-allMatches.csv")
rcb_csk_matches = pd.read_csv(path)
scorecard=yka.teamBattingScorecardOppnAllMatches(rcb_csk_matches,'Royal Challengers Bangalore',"Chennai Super Kings")
print(scorecard)
##              batsman  runs  balls  4s  6s          SR
## 5            V Kohli   706    570  51  30  123.859649
## 20          CH Gayle   270    228  12  23  118.421053
## 19    AB de Villiers   241    157  26   9  153.503185
## 6           R Dravid   133    117  18   0  113.675214
## 3          JH Kallis   123    113  21   0  108.849558
## 22        MA Agarwal   120    104  15   4  115.384615
## 2        LRPL Taylor   117    102   5   6  114.705882
## 11        RV Uthappa   115     77   7   8  149.350649
## 21         SS Tiwary    86     88   4   3   97.727273
## 17         MK Pandey    73     72  10   0  101.388889
## 32        KD Karthik    61     58   9   0  105.172414
## 34           D Wiese    51     43   4   2  118.604651
## 33           SN Khan    50     36   5   1  138.888889
## 1           W Jaffer    50     36   5   2  138.888889
## 7            P Kumar    39     25   2   2  156.000000
## 28      Yuvraj Singh    38     33   2   1  115.151515
## 4         MV Boucher    37     33   4   1  112.121212
## 23     LA Pomersbach    31     21   2   2  147.619048
## 8             Z Khan    29     27   3   0  107.407407
## 12      KP Pietersen    23     15   2   1  153.333333
## 38          CL White    21     13   2   1  161.538462
## 26       YV Takawale    19     17   4   0  111.764706
## 31          MS Bisla    17     14   3   0  121.428571
## 14     R Vinay Kumar    17     10   1   1  170.000000
## 25        RR Rossouw    15     13   1   1  115.384615
## 40        AUK Pathan    14      6   2   1  233.333333
## 42   JJ van der Wath    14     11   1   1  127.272727
## 27            VH Zol    13     12   0   1  108.333333
## 30          MA Starc    13     16   1   0   81.250000
## 24      MC Henriques    12      4   3   0  300.000000
## 44          A Mithun    11      8   2   0  137.500000
## 50          PA Patel    10     14   2   0   71.428571
## 36        SP Goswami    10     19   1   0   52.631579
## 0           B Chipli     8     12   1   0   66.666667
## 9            B Akhil     8     12   1   0   66.666667
## 29            S Rana     6      8   0   0   75.000000
## 16  RE van der Merwe     5     12   0   0   41.666667
## 49   KB Arun Karthik     5      5   0   0  100.000000
## 54     Mandeep Singh     4      7   0   0   57.142857
## 37     Misbah-ul-Haq     4      6   0   0   66.666667
## 52      NJ Maddinson     4      7   1   0   57.142857
## 51          AN Ahmed     4      1   1   0  400.000000
## 15          A Kumble     3      6   0   0   50.000000
## 43        DL Vettori     3      4   0   0   75.000000
## 47      DT Christian     2      2   0   0  100.000000
## 45   J Syed Mohammad     2      3   0   0   66.666667
## 35          HV Patel     2      5   0   0   40.000000
## 41         CA Pujara     2      6   0   0   33.333333
## 10          DW Steyn     1      5   0   0   20.000000
## 18        EJG Morgan     1      4   0   0   25.000000
## 46        RR Bhatkal     0      2   0   0    0.000000
## 48         R Rampaul     0      6   0   0    0.000000
## 13         R Bishnoi     0      1   0   0    0.000000
## 39        TM Dilshan     0      1   0   0    0.000000
## 53     Iqbal Abdulla     0      3   0   0    0.000000
## 55         S Aravind     0      1   0   0    0.000000

11.Team Bowling scorecard (all matches with opposing IPL team)

The output below gives the performance of Rajasthan Royals bowlers against Kolkata Knight Riders in all matches between the 2 IPL teams.

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Kolkata Knight Riders-Rajasthan Royals-allMatches.csv")
rcb_csk_matches = pd.read_csv(path)
scorecard=yka.teamBowlingScorecardOppnAllMatches(rcb_csk_matches,'Rajasthan Royals',"Kolkata Knight Riders")
print(scorecard)
##               bowler  overs  runs  maidens  wicket   econrate
## 31   Shakib Al Hasan     25   153        0       9   6.120000
## 12          I Sharma     15   118        0       6   7.866667
## 33          Umar Gul      8    61        0       6   7.625000
## 29         SP Narine     24   155        0       6   6.458333
## 1           AB Dinda     20   126        0       6   6.300000
## 23     R Vinay Kumar      8    72        0       5   9.000000
## 22          R Bhatia     15   104        0       5   6.933333
## 0         AB Agarkar     12   105        0       4   8.750000
## 17         LR Shukla     12    87        0       4   7.250000
## 6              B Lee     15    90        0       4   6.000000
## 3         AD Russell      7    59        0       4   8.428571
## 34         YK Pathan      8    61        0       4   7.625000
## 14        JD Unadkat      4    26        0       3   6.500000
## 15         JH Kallis     20   149        0       3   7.450000
## 16          L Balaji     11    73        0       3   6.636364
## 27           SE Bond      8    52        1       3   6.500000
## 10     CK Langeveldt      4    15        0       3   3.750000
## 13     Iqbal Abdulla     10    70        0       3   7.000000
## 28   SMSM Senanayake      4    26        0       2   6.500000
## 7         BAW Mendis      4    19        0       2   4.750000
## 18          M Kartik      8    56        0       2   7.000000
## 4      Anureet Singh      4    35        0       2   8.750000
## 32          UT Yadav      7    67        0       2   9.571429
## 30         SS Sarkar      3    15        0       1   5.000000
## 26        SC Ganguly      6    61        0       1  10.166667
## 5      Azhar Mahmood      3    41        0       1  13.666667
## 19          M Morkel      8    78        0       1   9.750000
## 11         DJ Hussey      2    26        0       0  13.000000
## 2         AD Mathews      3    33        0       0  11.000000
## 8           BJ Hodge      2    34        0       0  17.000000
## 25          S Narwal      2    17        0       0   8.500000
## 24  RN ten Doeschate      2    14        0       0   7.000000
## 21         PP Chawla      4    39        0       0   9.750000
## 20    Mohammed Shami      3    26        0       0   8.666667
## 9           CH Gayle      4    20        0       0   5.000000

12. Team Bowling wicket kind -Chart (all matches with opposing IPL team)

The functions compute and display the kind of wickets taken(bowled, caught, lbw etc) by an IPL team in all matches against another IPL team

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Chennai Super Kings-Rajasthan Royals-allMatches.csv")
csk_rr_matches = pd.read_csv(path)
yka.teamBowlingWicketKindOppositionAllMatches(csk_rr_matches,'Chennai Super Kings','Rajasthan Royals',plot=True,top=5,wickets=1)

13. Team Bowling wicket kind -Dataframe (all matches with opposing IPL team)

This gives the type of wickets taken

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Delhi Daredevils-Pune Warriors-allMatches.csv")
dd_pw_matches = pd.read_csv(path)
m=yka.teamBowlingWicketKindOppositionAllMatches(dd_pw_matches,'Pune Warriors','Delhi Daredevils',plot=False,top=4,wickets=1)
print(m)
##       bowler    kind  wickets
## 0  IK Pathan  bowled        1
## 1  IK Pathan  caught        3
## 2   M Morkel  bowled        1
## 3   M Morkel  caught        3
## 4   S Nadeem  bowled        1
## 5   S Nadeem  caught        2
## 6   UT Yadav  caught        3

14 Team Bowler vs Batman -Plot (all matches with opposing IPL team)

The function below gives the performance of bowlers in all matches against another IPL team.

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Sunrisers Hyderabad-Kolkata Knight Riders-allMatches.csv")
srh_kkr_matches = pd.read_csv(path)
yka.teamBowlersVsBatsmenOppnAllMatches(srh_kkr_matches,'Sunrisers Hyderabad','Kolkata Knight Riders',plot=True,top=5,runsConceded=10)

15 Team Bowler vs Batman – Dataframe (all matches with opposing IPL team)

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Royal Challengers Bangalore-Kings XI Punjab-allMatches.csv")
srh_kkr_matches = pd.read_csv(path)
m=yka.teamBowlersVsBatsmenOppnAllMatches(srh_kkr_matches,'Royal Challengers Bangalore','Kings XI Punjab',plot=False,top=1,runsConceded=30)
print(m)
##        bowler           batsman  runsConceded
## 0   PP Chawla          A Kumble             1
## 1   PP Chawla          A Mithun             1
## 2   PP Chawla       AB McDonald             3
## 3   PP Chawla    AB de Villiers            29
## 4   PP Chawla         CA Pujara            13
## 5   PP Chawla          CH Gayle            62
## 6   PP Chawla     CK Langeveldt             1
## 7   PP Chawla          CL White             3
## 8   PP Chawla        DL Vettori             1
## 9   PP Chawla          DT Patil             4
## 10  PP Chawla         JH Kallis            17
## 11  PP Chawla   JJ van der Wath             1
## 12  PP Chawla   KB Arun Karthik             4
## 13  PP Chawla      KP Pietersen            14
## 14  PP Chawla       LRPL Taylor             6
## 15  PP Chawla            M Kaif             2
## 16  PP Chawla         MK Pandey            10
## 17  PP Chawla        MV Boucher             9
## 18  PP Chawla     Misbah-ul-Haq             0
## 19  PP Chawla           P Kumar             0
## 20  PP Chawla          R Dravid            28
## 21  PP Chawla  RE van der Merwe             7
## 22  PP Chawla        RV Uthappa            19
## 23  PP Chawla         SS Tiwary             6
## 24  PP Chawla           V Kohli            56
## 25  PP Chawla            Z Khan             0

16 Team Wins and Losses (all matches with opposing IPL team)

The function below computes and plot the number of wins and losses in a head-on confrontation between 2 IPL teams

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Chennai Super Kings-Delhi Daredevils-allMatches.csv")
csk_dd_matches = pd.read_csv(path)
yka.plotWinLossBetweenTeams(csk_dd_matches,'Chennai Super Kings','Delhi Daredevils')

17 Team Wins by win type (all matches with opposing IPL team)

This function shows how the win happened whether by runs or by wickets

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Chennai Super Kings-Delhi Daredevils-allMatches.csv")
csk_dd_matches = pd.read_csv(path)
yka.plotWinsByRunOrWickets(csk_dd_matches,'Chennai Super Kings')

18 Team Wins by toss decision-field (all matches with opposing IPL team)

This show how Rajasthan Royals fared when it chose to field on winning the toss

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Rajasthan Royals-Kings XI Punjab-allMatches.csv")
rr_kxip_matches = pd.read_csv(path)
yka.plotWinsbyTossDecision(rr_kxip_matches,'Rajasthan Royals',tossDecision='field')

18 Team Wins by toss decision-bat (all matches with opposing IPL team)

This plot shows how Mumbai Indians fared when it chose to bat on winning the toss

import pandas as pd
import os
import yorkpy.analytics as yka
dir1= "C:\\software\\cricket-package\\yorkpyIPLData\\data1"
path=os.path.join(dir1,"Mumbai Indians-Royal Challengers Bangalore-allMatches.csv")
mi_rcb_matches = pd.read_csv(path)
yka.plotWinsbyTossDecision(mi_rcb_matches,'Mumbai Indians',tossDecision='bat')

Feel free to clone/download the code from Github yorkpy

Important note: Do check out my other posts using yorkpy at yorkpy-posts